10 exam-style questions with answers and explanations, straight from our 1,030-question bank. Tap an answer to check yourself. When you're ready, take the scored version in the free practice test.
These 10 free BCO questions are organized by exam domain, so you can see how each part of the National Ballast Control Operator (BCO) blueprint is tested. Reveal the answer and explanation under each question.
Domain 1: Q440-Ballast Control Operator-Deck General Safety
Question 1
Hydraulic oil is burning beneath a ballast-pump motor starter that has not yet been confirmed electrically isolated. The alarm has been raised, the fire remains small, and a trained operator has a clear escape route. Which available extinguisher is suitable for both the burning liquid and the energized equipment?
Show answer & explanation
Correct answer: A - Portable BC-rated dry-chemical extinguisher.
Question 2
An offshore forecast gives a significant wave height of 4 m. During the watch, an individual crest-to-trough wave height of about 7 m is observed. A crewmember concludes that the forecast must be wrong. Which explanation addresses that conclusion?
Show answer & explanation
Correct answer: B - Significant wave height averages the highest third of waves; individual waves can be higher.
Question 3
After heavy work on a hot drill floor, a rigger becomes confused, stumbles, and answers simple questions incorrectly. The rigger is still sweating heavily, and a core-temperature reading is not yet available. Choose the first-response plan.
Show answer & explanation
Correct answer: C - Suspect heat stroke; activate medical help and begin rapid cooling.
Question 4
A MODU medic requests urgent shore medical advice for an injured crewmember whose breathing and circulation are stable. There is no grave and imminent danger to the crewmember or the unit. The person in charge authorizes a radio call. Select the appropriate initial VHF voice transmission.
Show answer & explanation
Correct answer: D - PAN-PAN on Channel 16, followed by the urgency call and medical-assistance request.
Question 5
During a MODU fire-main test under 46 CFR 108.415, one required fire pump is operated alone. Hoses at the two highest hydrants discharge simultaneously. Pump-discharge pressure is 72 psi, but calibrated pitot readings at the two nozzles are 43 and 45 psi. What does this test establish?
Show answer & explanation
Correct answer: C - The pump fails the required nozzle-pressure test despite its higher discharge-gauge reading.
Domain 2: Q441-Ballast Control Operator-MODU Operations
Question 6
A 60-tonne package is already included in a semisubmersible's displacement at a vertical center of 6 m above baseline. The unit's crane lifts it clear of the deck. With the boom stationary, the package hangs freely with its own center of gravity at 8 m and its point of suspension at 26 m. For the static stability calculation, how should the package now be represented?
Show answer & explanation
Correct answer: C - Keep displacement unchanged and use 26 m for the package's effective vertical position.
Question 7
The loading condition for a MODU gives displacement 15,000 tonnes, transverse KM 12.60 m, and actual KG 11.40 m before free-surface correction. The total transverse free-surface moment of all slack tanks is 6,000 tonne-meters. The approved minimum corrected GM for this condition is 0.65 m. What result belongs in the stability check?
Show answer & explanation
Correct answer: D - Corrected GM is 0.80 m; the stated minimum is met.
Question 8
A floating MODU rests at a small angle to starboard after motion subsides. Following another disturbance, it settles at a similar angle to port without any cargo or tank transfer. Checks find symmetrical loading, no flooding, and no sustained external heeling moment. Several broad tanks are slack. This behavior most strongly suggests:
Show answer & explanation
Correct answer: B - An angle of loll associated with negative initial metacentric height.
Question 9
An upright, even-keel MODU has a ballast tank with a vertical measurement height of 5.0 m from the sounding datum to the ullage reference. Measured ullage is 2.3 m. The tank table gives 150 m³ at a 2.0 m sounding and 250 m³ at a 3.0 m sounding, with linear interpolation permitted. Ballast density is 1.025 tonnes/m³. What liquid mass should be entered on the variable load form, to the nearest 0.1 tonne?
Show answer & explanation
Correct answer: A - 225.5 tonnes
Question 10
A remote ballast-control console fails before a scheduled ballast change. Pump power and local valve controls remain available. The approved operating manual permits local operation with verified valve positions, independent tank measurements, and dedicated communications. Those safeguards are established, the loading condition is within limits, and the person in charge authorizes the change. How should the BCO carry out the order?
Show answer & explanation
Correct answer: A - Use the approved local controls with the specified monitoring and stop limits.
That's 10 of 1,030
The full bank has 1,020 more BCO questions with explanations.